Heat Detector Simplex

Spesifikasi Heat Detector Simplex

rated voltage: 30VDC, 75mA
allowable range of voltage: 15V to 30VDC
response lamp: LED Red
ambient temperature: -10 to 50 celcius
material : air chamber : color steel, base: polycarbonate resin

Rate of Rise (ROR) Heat Detector Simplex

Fixed temperature operation is suitable for most applications:
• Thermistor based design is inherently rate compensated due to minimal thermal lag
• Available for 135° F (57° C) or 200° F (93° C)
• UL and ULC spacing distance is 70 ft (21.3 m)
Available with rate-of-rise temperature detection:
• Dual thermistor rate-of-rise operation
• For use where anticipated ambient temperature changes are less than 6° F/minute (3.33° C/minute)
• UL and ULC spacing distance is 70 ft (21.3 m)
Epoxy encapsulated electronic design provides:
• Easily tested, self-restoring operation with repeatable accuracy
• Alarm indicating LED located on detector
• Current limited alarm that is compatible with two-wire initiating device circuits (IDCs)
• Designed for EMI compatibility
Optional remote alarm indicating LED Available base options:
• Bases for 2-wire or 4-wire operation
• Auxiliary relay output (refer to selection chart on page 2 for relay ratings)
• Remote alarm indicating LED output

Fungsi Heat Detector Simplex

Heat Detector Simplex merupakan salah satu material inputan dalam instalasi fire alarm. heat detector ini akan mendeteksi adanya panas akibat kebakaran. suhu minimal yang di deteksi mulai dari 68 derajat celcius. tersedia 2 tipe heat detector. yakni ror dan fixed temperature heat detector. keduanya mendeteksi panas dengan prinsip yang berbeda. untuk ruangan tertentu pemilihan detektor panas bahkan bisa menggunakan suhu yang lebih tinggi sampai 150 derajat celcius seperti pada ruangan boiler dan kitchen yang memang sudah memiliki suhu panas saat beroperasi.

Smoke Detector Simplex

Spesifikasi Smoke Detector Simplex

Voltage 15 to 32 VDC from Fire Alarm Control Panel IDC
Standby Current 100 μ A @ 24 VDC
Alarm Current, 2-Wire Operation Up to 86 mA maximum, exact current is determined by alarm current limiting of connected IDC
Alarm Current, 4-Wire Operation 24 mA typical @ 24 VDC Auxiliary Relay Ratings Refer to page 2 under Product Selection
Air Velocity Range 0-2000 ft/min (0-610 m/min)
UL Listed Temp. Range 32° to 100° F (0° to 38° C)
Operating Temp. Range 15° to 122° F (-9° to + 50° C)
Humidity Range 10% to 95% RH from 32° to 122° F (0° to 50° C) non-condensing
Color Frost White
Dimensions 4-7/8” Dia. x 1-7/8” H, mounted in base (124 mm x 48 mm); refer to page 3 for detail

Photoelectric Smoke Detector Simplex 4098-9601 TrueAlarm

Photoelectric smoke detector with on-board
TrueAlarm sensitivity drift compensation
Functional chamber enclosure:
• Louvered design enhances smoke capture by directing flow to chamber
• Entrance areas are minimally visible when ceiling mounted
Multi-function indicator LED indicates normal and alarm conditions
Magnetically operated functional test:
• Initiates alarm and verifies performance
• Identifies general sensitivity status using detector LED Models available in two sensitivity settings:
• 4098-9601, Standard Sensitivity, nominal 2.8%/ft obscuration*
• 4098-9605, Special Application Sensitivity, nominal 3.5%/ft obscuration
Available options:
• Bases for 2-wire or 4-wire operation
• Auxiliary alarm relay output
• Remote alarm indicating LED
Designed for EMI compatibility
UL listed to Standard 268


Photoelectric Smoke & Heat Detector 4098-9602 TrueSense

TrueAlarm detection with TrueSense operation
**
combines photoelectric detection with heat detection to provide a multi-mode detector with four detection mechanisms:
• Stable and reliable photoelectric smoke detection with built-in TrueAlarm sensitivity drift compensation
• Resettable, thermistor-based fixed temperature detection
• Resettable, thermistor-based rate-of-rise temperature detection
• And TrueSense detection, a patented correlation of smoke activity and thermal activity providing intelligent fire detection earlier than with either activity alone**
Functional chamber enclosure:
• Louvered design enhances smoke capture by directing flow to chamber
• Entrance areas are minimally visible when ceiling mounted Multi-function LED indicator:
• Indicates normal and alarm conditions
• Provides status during magnetic functional test
Magnetically operated functional test:
• Initiates alarm and verifies performance
• Identifies general sensitivity status using detector LED pulses (normal, more sensitive, or less sensitive)
• With detectors categorized as normal or needing cleaning or other service, maintenance priorities can be more easily determined
Available options:
• Bases for 2-wire or 4-wire operation
• Auxiliary alarm relay output
• Remote alarm indicating LED

Fungsi Smoke Detector Simplex

Smoke Detector Simplex akan mendeteksi asap kebakaran dengan baik. perangkat ini akan memberikan inputan berupa sinyal elektrik yang akan diteruskan ke panel control. dari panel control, system akan aktif sehingga dapat memperingatkan para penghuni gedung untuk segera mengambil tindakan pemadaman. atau melakukan evakuasi, baik barang maupun diri. fire alarm akan membantu melakukan identifikasi kebakaran sejak dini. baik melalui detektor asap atau panas.